BoxLayout

java.lang.Object
- javax.swing.BoxLayout

All Implemented Interfaces:

LayoutManager, LayoutManager2, Serializable

Direct Known Subclasses:

DefaultMenuLayout
```
public class BoxLayout
extends Object
implements LayoutManager2, Serializable
```
A layout manager that allows multiple components to be laid out either vertically or horizontally. The components will not wrap so, for example, a vertical arrangement of components will stay vertically arranged when the frame is resized.

Nesting multiple panels with different combinations of horizontal and vertical gives an effect similar to GridBagLayout, without the complexity. The diagram shows two panels arranged horizontally, each of which contains 3 components arranged vertically.
The BoxLayout manager is constructed with an axis parameter that specifies the type of layout that will be done. There are four choices:
X_AXIS - Components are laid out horizontally from left to right.

Y_AXIS - Components are laid out vertically from top to bottom.

LINE_AXIS - Components are laid out the way words are laid out in a line, based on the container's ComponentOrientation property. If the container's ComponentOrientation is horizontal then components are laid out horizontally, otherwise they are laid out vertically. For horizontal orientations, if the container's ComponentOrientation is left to right then components are laid out left to right, otherwise they are laid out right to left. For vertical orientations components are always laid out from top to bottom.

PAGE_AXIS - Components are laid out the way text lines are laid out on a page, based on the container's ComponentOrientation property. If the container's ComponentOrientation is horizontal then components are laid out vertically, otherwise they are laid out horizontally. For horizontal orientations, if the container's ComponentOrientation is left to right then components are laid out left to right, otherwise they are laid out right to left. For vertical orientations components are always laid out from top to bottom.

For all directions, components are arranged in the same order as they were added to the container.
BoxLayout attempts to arrange components at their preferred widths (for horizontal layout) or heights (for vertical layout). For a horizontal layout, if not all the components are the same height, BoxLayout attempts to make all the components as high as the highest component. If that's not possible for a particular component, then BoxLayout aligns that component vertically, according to the component's Y alignment. By default, a component has a Y alignment of 0.5, which means that the vertical center of the component should have the same Y coordinate as the vertical centers of other components with 0.5 Y alignment.
Similarly, for a vertical layout, BoxLayout attempts to make all components in the column as wide as the widest component. If that fails, it aligns them horizontally according to their X alignments. For PAGE_AXIS layout, horizontal alignment is done based on the leading edge of the component. In other words, an X alignment value of 0.0 means the left edge of a component if the container's ComponentOrientation is left to right and it means the right edge of the component otherwise.
Instead of using BoxLayout directly, many programs use the Box class. The Box class is a lightweight container that uses a BoxLayout. It also provides handy methods to help you use BoxLayout well. Adding components to multiple nested boxes is a powerful way to get the arrangement you want.
For further information and examples see How to Use BoxLayout, a section in The Java Tutorial.
Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. As of 1.4, support for long term storage of all JavaBeans^TM has been added to the java.beans package. Please see XMLEncoder.

See Also:
Box, ComponentOrientation, JComponent.getAlignmentX(), JComponent.getAlignmentY()

Field Summary

Fields
Modifier and Type	Field and Description
`static int`	`LINE_AXIS` Specifies that components should be laid out in the direction of a line of text as determined by the target container's `ComponentOrientation` property.
`static int`	`PAGE_AXIS` Specifies that components should be laid out in the direction that lines flow across a page as determined by the target container's `ComponentOrientation` property.
`static int`	`X_AXIS` Specifies that components should be laid out left to right.
`static int`	`Y_AXIS` Specifies that components should be laid out top to bottom.

Constructor Summary

Constructors
Constructor and Description

BoxLayout(Container target, int axis)
Creates a layout manager that will lay out components along the given axis.

Constructors
Constructor and Description
`BoxLayout(Container target, int axis)` Creates a layout manager that will lay out components along the given axis.

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`addLayoutComponent(Component comp, Object constraints)` Not used by this class.
`void`	`addLayoutComponent(String name, Component comp)` Not used by this class.
`int`	`getAxis()` Returns the axis that was used to lay out components.
`float`	`getLayoutAlignmentX(Container target)` Returns the alignment along the X axis for the container.
`float`	`getLayoutAlignmentY(Container target)` Returns the alignment along the Y axis for the container.
`Container`	`getTarget()` Returns the container that uses this layout manager.
`void`	`invalidateLayout(Container target)` Indicates that a child has changed its layout related information, and thus any cached calculations should be flushed.
`void`	`layoutContainer(Container target)` Called by the AWT when the specified container needs to be laid out.
`Dimension`	`maximumLayoutSize(Container target)` Returns the maximum dimensions the target container can use to lay out the components it contains.
`Dimension`	`minimumLayoutSize(Container target)` Returns the minimum dimensions needed to lay out the components contained in the specified target container.
`Dimension`	`preferredLayoutSize(Container target)` Returns the preferred dimensions for this layout, given the components in the specified target container.
`void`	`removeLayoutComponent(Component comp)` Not used by this class.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - X_AXIS
```
public static final int X_AXIS
```
    Specifies that components should be laid out left to right.
    
    See Also:
    Constant Field Values
  - Y_AXIS
```
public static final int Y_AXIS
```
    Specifies that components should be laid out top to bottom.
    
    See Also:
    Constant Field Values
  - LINE_AXIS
```
public static final int LINE_AXIS
```
    Specifies that components should be laid out in the direction of a line of text as determined by the target container's ComponentOrientation property.
    
    See Also:
    Constant Field Values
  - PAGE_AXIS
```
public static final int PAGE_AXIS
```
    Specifies that components should be laid out in the direction that lines flow across a page as determined by the target container's ComponentOrientation property.
    
    See Also:
    Constant Field Values
- Constructor Detail
  - BoxLayout
```
@ConstructorProperties(value={"target","axis"})
public BoxLayout(Container target,
                                    int axis)
```
    Creates a layout manager that will lay out components along the given axis.
    
    Parameters:
    target - the container that needs to be laid out
    axis - the axis to lay out components along. Can be one of: BoxLayout.X_AXIS, BoxLayout.Y_AXIS, BoxLayout.LINE_AXIS or BoxLayout.PAGE_AXIS
    
    Throws:
    
    AWTError - if the value of axis is invalid
- Method Detail
  - getTarget
```
public final Container getTarget()
```
    Returns the container that uses this layout manager.
    
    Returns:
    the container that uses this layout manager
    Since:
    
    1.6
  - getAxis
```
public final int getAxis()
```
    Returns the axis that was used to lay out components. Returns one of: BoxLayout.X_AXIS, BoxLayout.Y_AXIS, BoxLayout.LINE_AXIS or BoxLayout.PAGE_AXIS
    
    Returns:
    the axis that was used to lay out components
    Since:
    
    1.6
  - invalidateLayout
```
public void invalidateLayout(Container target)
```
    Indicates that a child has changed its layout related information, and thus any cached calculations should be flushed.
    This method is called by AWT when the invalidate method is called on the Container. Since the invalidate method may be called asynchronously to the event thread, this method may be called asynchronously.
    
    Specified by:
    
    invalidateLayout in interface LayoutManager2
    
    Parameters:
    target - the affected container
    
    Throws:
    
    AWTError - if the target isn't the container specified to the BoxLayout constructor
  - addLayoutComponent
```
public void addLayoutComponent(String name,
                      Component comp)
```
    Not used by this class.
    
    Specified by:
    
    addLayoutComponent in interface LayoutManager
    
    Parameters:
    name - the name of the component
    comp - the component
  - removeLayoutComponent
```
public void removeLayoutComponent(Component comp)
```
    Not used by this class.
    
    Specified by:
    
    removeLayoutComponent in interface LayoutManager
    
    Parameters:
    comp - the component
  - addLayoutComponent
```
public void addLayoutComponent(Component comp,
                      Object constraints)
```
    Not used by this class.
    
    Specified by:
    
    addLayoutComponent in interface LayoutManager2
    
    Parameters:
    comp - the component
    constraints - constraints
  - preferredLayoutSize
```
public Dimension preferredLayoutSize(Container target)
```
    Returns the preferred dimensions for this layout, given the components in the specified target container.
    
    Specified by:
    
    preferredLayoutSize in interface LayoutManager
    
    Parameters:
    target - the container that needs to be laid out
    
    Returns:
    the dimensions >= 0 && <= Integer.MAX_VALUE
    
    Throws:
    
    AWTError - if the target isn't the container specified to the BoxLayout constructor
    See Also:
    Container, minimumLayoutSize(java.awt.Container), maximumLayoutSize(java.awt.Container)
  - minimumLayoutSize
```
public Dimension minimumLayoutSize(Container target)
```
    Returns the minimum dimensions needed to lay out the components contained in the specified target container.
    
    Specified by:
    
    minimumLayoutSize in interface LayoutManager
    
    Parameters:
    target - the container that needs to be laid out
    
    Returns:
    the dimensions >= 0 && <= Integer.MAX_VALUE
    
    Throws:
    
    AWTError - if the target isn't the container specified to the BoxLayout constructor
    See Also:
    preferredLayoutSize(java.awt.Container), maximumLayoutSize(java.awt.Container)
  - maximumLayoutSize
```
public Dimension maximumLayoutSize(Container target)
```
    Returns the maximum dimensions the target container can use to lay out the components it contains.
    
    Specified by:
    
    maximumLayoutSize in interface LayoutManager2
    
    Parameters:
    target - the container that needs to be laid out
    
    Returns:
    the dimenions >= 0 && <= Integer.MAX_VALUE
    
    Throws:
    
    AWTError - if the target isn't the container specified to the BoxLayout constructor
    See Also:
    preferredLayoutSize(java.awt.Container), minimumLayoutSize(java.awt.Container)
  - getLayoutAlignmentX
```
public float getLayoutAlignmentX(Container target)
```
    Returns the alignment along the X axis for the container. If the box is horizontal, the default alignment will be returned. Otherwise, the alignment needed to place the children along the X axis will be returned.
    
    Specified by:
    
    getLayoutAlignmentX in interface LayoutManager2
    
    Parameters:
    target - the container
    
    Returns:
    the alignment >= 0.0f && <= 1.0f
    
    Throws:
    
    AWTError - if the target isn't the container specified to the BoxLayout constructor
  - getLayoutAlignmentY
```
public float getLayoutAlignmentY(Container target)
```
    Returns the alignment along the Y axis for the container. If the box is vertical, the default alignment will be returned. Otherwise, the alignment needed to place the children along the Y axis will be returned.
    
    Specified by:
    
    getLayoutAlignmentY in interface LayoutManager2
    
    Parameters:
    target - the container
    
    Returns:
    the alignment >= 0.0f && <= 1.0f
    
    Throws:
    
    AWTError - if the target isn't the container specified to the BoxLayout constructor
  - layoutContainer
```
public void layoutContainer(Container target)
```
    Called by the AWT when the specified container needs to be laid out.
    
    Specified by:
    
    layoutContainer in interface LayoutManager
    
    Parameters:
    target - the container to lay out
    
    Throws:
    
    AWTError - if the target isn't the container specified to the BoxLayout constructor

Class BoxLayout

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

X_AXIS

Y_AXIS

LINE_AXIS

PAGE_AXIS

Constructor Detail

BoxLayout

Method Detail

getTarget

getAxis

invalidateLayout

addLayoutComponent

removeLayoutComponent

addLayoutComponent

preferredLayoutSize

minimumLayoutSize

maximumLayoutSize

getLayoutAlignmentX

getLayoutAlignmentY

layoutContainer