public interface CachedRowSet extends RowSet, Joinable
CachedRowSet must implement.
The reference implementation of the CachedRowSet interface provided
by Oracle Corporation is a standard implementation. Developers may use this implementation
just as it is, they may extend it, or they may choose to write their own implementations
of this interface.
A CachedRowSet object is a container for rows of data
that caches its rows in memory, which makes it possible to operate without always being
connected to its data source. Further, it is a
JavaBeansTM component and is scrollable,
updatable, and serializable. A CachedRowSet object typically
contains rows from a result set, but it can also contain rows from any file
with a tabular format, such as a spread sheet. The reference implementation
supports getting data only from a ResultSet object, but
developers can extend the SyncProvider implementations to provide
access to other tabular data sources.
An application can modify the data in a CachedRowSet object, and
those modifications can then be propagated back to the source of the data.
A CachedRowSet object is a disconnected rowset, which means
that it makes use of a connection to its data source only briefly. It connects to its
data source while it is reading data to populate itself with rows and again
while it is propagating changes back to its underlying data source. The rest
of the time, a CachedRowSet object is disconnected, including
while its data is being modified. Being disconnected makes a RowSet
object much leaner and therefore much easier to pass to another component. For
example, a disconnected RowSet object can be serialized and passed
over the wire to a thin client such as a personal digital assistant (PDA).
CachedRowSet ObjectCachedRowSet
supplied in the reference implementation (RI) to create a default
CachedRowSet object.
CachedRowSetImpl crs = new CachedRowSetImpl();
This new CachedRowSet object will have its properties set to the
default properties of a BaseRowSet object, and, in addition, it will
have an RIOptimisticProvider object as its synchronization provider.
RIOptimisticProvider, one of two SyncProvider
implementations included in the RI, is the default provider that the
SyncFactory singleton will supply when no synchronization
provider is specified.
A SyncProvider object provides a CachedRowSet object
with a reader (a RowSetReader object) for reading data from a
data source to populate itself with data. A reader can be implemented to read
data from a ResultSet object or from a file with a tabular format.
A SyncProvider object also provides
a writer (a RowSetWriter object) for synchronizing any
modifications to the CachedRowSet object's data made while it was
disconnected with the data in the underlying data source.
A writer can be implemented to exercise various degrees of care in checking
for conflicts and in avoiding them.
(A conflict occurs when a value in the data source has been changed after
the rowset populated itself with that value.)
The RIOptimisticProvider implementation assumes there will be
few or no conflicts and therefore sets no locks. It updates the data source
with values from the CachedRowSet object only if there are no
conflicts.
Other writers can be implemented so that they always write modified data to
the data source, which can be accomplished either by not checking for conflicts
or, on the other end of the spectrum, by setting locks sufficient to prevent data
in the data source from being changed. Still other writer implementations can be
somewhere in between.
A CachedRowSet object may use any
SyncProvider implementation that has been registered
with the SyncFactory singleton. An application
can find out which SyncProvider implementations have been
registered by calling the following line of code.
java.util.Enumeration providers = SyncFactory.getRegisteredProviders();
There are two ways for a CachedRowSet object to specify which
SyncProvider object it will use.
The following line of code creates the CachedRowSet
object crs2 that is initialized with default values except that its
SyncProvider object is the one specified.
CachedRowSetImpl crs2 = new CachedRowSetImpl(
"com.fred.providers.HighAvailabilityProvider");
SyncProvider using the CachedRowSet
method setSyncProvider
The following line of code resets the SyncProvider object
for crs, the CachedRowSet object created with the
default constructor.
crs.setSyncProvider("com.fred.providers.HighAvailabilityProvider");
SyncProvider for
more details.
CachedRowSet ObjectCachedRowSet object by using the
getter methods inherited from the ResultSet
interface. The following examples, in which crs is a
CachedRowSet
object, demonstrate how to iterate through the rows, retrieving the column
values in each row. The first example uses the version of the
getter methods that take a column number; the second example
uses the version that takes a column name. Column numbers are generally
used when the RowSet object's command
is of the form SELECT * FROM TABLENAME; column names are most
commonly used when the command specifies columns by name.
while (crs.next()) {
String name = crs.getString(1);
int id = crs.getInt(2);
Clob comment = crs.getClob(3);
short dept = crs.getShort(4);
System.out.println(name + " " + id + " " + comment + " " + dept);
}
while (crs.next()) {
String name = crs.getString("NAME");
int id = crs.getInt("ID");
Clob comment = crs.getClob("COM");
short dept = crs.getShort("DEPT");
System.out.println(name + " " + id + " " + comment + " " + dept);
}
RowSetMetaDataCachedRowSet
object by calling ResultSetMetaData and RowSetMetaData
methods on a RowSetMetaData object. The following code fragment,
in which crs is a CachedRowSet object, illustrates the process.
The first line creates a RowSetMetaData object with information
about the columns in crs. The method getMetaData,
inherited from the ResultSet interface, returns a
ResultSetMetaData object, which is cast to a
RowSetMetaData object before being assigned to the variable
rsmd. The second line finds out how many columns jrs has, and
the third line gets the JDBC type of values stored in the second column of
jrs.
RowSetMetaData rsmd = (RowSetMetaData)crs.getMetaData();
int count = rsmd.getColumnCount();
int type = rsmd.getColumnType(2);
The RowSetMetaData interface differs from the
ResultSetMetaData interface in two ways.
setter methods: A RowSet
object uses these methods internally when it is populated with data from a
different ResultSet object.
getter methods: Some
ResultSetMetaData methods to not apply to a RowSet
object. For example, methods retrieving whether a column value is writable
or read only do not apply because all of a RowSet object's
columns will be writable or read only, depending on whether the rowset is
updatable or not.
RowSetMetaData object, implementations must
override the getMetaData() method defined in
java.sql.ResultSet and return a RowSetMetaData object.
CachedRowSet ObjectCachedRowSet object is similar to updating a
ResultSet object, but because the rowset is not connected to
its data source while it is being updated, it must take an additional step
to effect changes in its underlying data source. After calling the method
updateRow or insertRow, a
CachedRowSet
object must also call the method acceptChanges to have updates
written to the data source. The following example, in which the cursor is
on a row in the CachedRowSet object crs, shows
the code required to update two column values in the current row and also
update the RowSet object's underlying data source.
crs.updateShort(3, 58);
crs.updateInt(4, 150000);
crs.updateRow();
crs.acceptChanges();
The next example demonstrates moving to the insert row, building a new
row on the insert row, inserting it into the rowset, and then calling the
method acceptChanges to add the new row to the underlying data
source. Note that as with the getter methods, the updater methods may take
either a column index or a column name to designate the column being acted upon.
crs.moveToInsertRow();
crs.updateString("Name", "Shakespeare");
crs.updateInt("ID", 10098347);
crs.updateShort("Age", 58);
crs.updateInt("Sal", 150000);
crs.insertRow();
crs.moveToCurrentRow();
crs.acceptChanges();
NOTE: Where the insertRow() method inserts the contents of a
CachedRowSet object's insert row is implementation-defined.
The reference implementation for the CachedRowSet interface
inserts a new row immediately following the current row, but it could be
implemented to insert new rows in any number of other places.
Another thing to note about these examples is how they use the method
acceptChanges. It is this method that propagates changes in
a CachedRowSet object back to the underlying data source,
calling on the RowSet object's writer internally to write
changes to the data source. To do this, the writer has to incur the expense
of establishing a connection with that data source. The
preceding two code fragments call the method acceptChanges
immediately after calling updateRow or insertRow.
However, when there are multiple rows being changed, it is more efficient to call
acceptChanges after all calls to updateRow
and insertRow have been made. If acceptChanges
is called only once, only one connection needs to be established.
acceptChanges is executed, the
CachedRowSet object's writer, a RowSetWriterImpl
object, is called behind the scenes to write the changes made to the
rowset to the underlying data source. The writer is implemented to make a
connection to the data source and write updates to it.
A writer is made available through an implementation of the
SyncProvider interface, as discussed in section 1,
"Creating a CachedRowSet Object."
The default reference implementation provider, RIOptimisticProvider,
has its writer implemented to use an optimistic concurrency control
mechanism. That is, it maintains no locks in the underlying database while
the rowset is disconnected from the database and simply checks to see if there
are any conflicts before writing data to the data source. If there are any
conflicts, it does not write anything to the data source.
The reader/writer facility
provided by the SyncProvider class is pluggable, allowing for the
customization of data retrieval and updating. If a different concurrency
control mechanism is desired, a different implementation of
SyncProvider can be plugged in using the method
setSyncProvider.
In order to use the optimistic concurrency control routine, the
RIOptismisticProvider maintains both its current
value and its original value (the value it had immediately preceding the
current value). Note that if no changes have been made to the data in a
RowSet object, its current values and its original values are the same,
both being the values with which the RowSet object was initially
populated. However, once any values in the RowSet object have been
changed, the current values and the original values will be different, though at
this stage, the original values are still the initial values. With any subsequent
changes to data in a RowSet object, its original values and current
values will still differ, but its original values will be the values that
were previously the current values.
Keeping track of original values allows the writer to compare the RowSet
object's original value with the value in the database. If the values in
the database differ from the RowSet object's original values, which means that
the values in the database have been changed, there is a conflict.
Whether a writer checks for conflicts, what degree of checking it does, and how
it handles conflicts all depend on how it is implemented.
BaseRowSet class. A listener for a
CachedRowSet object is a component that wants to be notified
whenever there is a change in the rowset. For example, if a
CachedRowSet object contains the results of a query and
those
results are being displayed in, say, a table and a bar graph, the table and
bar graph could be registered as listeners with the rowset so that they can
update themselves to reflect changes. To become listeners, the table and
bar graph classes must implement the RowSetListener interface.
Then they can be added to the CachedRowSet object's list of
listeners, as is illustrated in the following lines of code.
crs.addRowSetListener(table);
crs.addRowSetListener(barGraph);
Each CachedRowSet method that moves the cursor or changes
data also notifies registered listeners of the changes, so
table and barGraph will be notified when there is
a change in crs.
CachedRowSet object is to
pass data between different components of an application. Because it is
serializable, a CachedRowSet object can be used, for example,
to send the result of a query executed by an enterprise JavaBeans component
running in a server environment over a network to a client running in a
web browser.
While a CachedRowSet object is disconnected, it can be much
leaner than a ResultSet object with the same data.
As a result, it can be especially suitable for sending data to a thin client
such as a PDA, where it would be inappropriate to use a JDBC driver
due to resource limitations or security considerations.
Thus, a CachedRowSet object provides a means to "get rows in"
without the need to implement the full JDBC API.
CachedRowSet objects is to provide
scrolling and updating for ResultSet objects that
do not provide these capabilities themselves. In other words, a
CachedRowSet object can be used to augment the
capabilities of a JDBC technology-enabled driver (hereafter called a
"JDBC driver") when the DBMS does not provide full support for scrolling and
updating. To achieve the effect of making a non-scrollble and read-only
ResultSet object scrollable and updatable, a programmer
simply needs to create a CachedRowSet object populated
with that ResultSet object's data. This is demonstrated
in the following code fragment, where stmt is a
Statement object.
ResultSet rs = stmt.executeQuery("SELECT * FROM EMPLOYEES");
CachedRowSetImpl crs = new CachedRowSetImpl();
crs.populate(rs);
The object crs now contains the data from the table
EMPLOYEES, just as the object rs does.
The difference is that the cursor for crs can be moved
forward, backward, or to a particular row even if the cursor for
rs can move only forward. In addition, crs is
updatable even if rs is not because by default, a
CachedRowSet object is both scrollable and updatable.
In summary, a CachedRowSet object can be thought of as simply
a disconnected set of rows that are being cached outside of a data source.
Being thin and serializable, it can easily be sent across a wire,
and it is well suited to sending data to a thin client. However, a
CachedRowSet object does have a limitation: It is limited in
size by the amount of data it can store in memory at one time.
CachedRowSet class is that it makes it
possible to retrieve and store data from sources other than a relational
database. The reader for a rowset can be implemented to read and populate
its rowset with data from any tabular data source, including a spreadsheet
or flat file.
Because both a CachedRowSet object and its metadata can be
created from scratch, a component that acts as a factory for rowsets
can use this capability to create a rowset containing data from
non-SQL data sources. Nevertheless, it is expected that most of the time,
CachedRowSet objects will contain data that was fetched
from an SQL database using the JDBC API.
ResultSet object need to
set the properties that are required for making a database connection.
If a rowset uses the DriverManager facility to make a
connection, it needs to set a property for the JDBC URL that identifies
the appropriate driver, and it needs to set the properties that give the
user name and password.
If, on the other hand, the rowset uses a DataSource object
to make the connection, which is the preferred method, it does not need to
set the property for the JDBC URL. Instead, it needs to set
properties for the logical name of the data source, for the user name,
and for the password.
NOTE: In order to use a DataSource object for making a
connection, the DataSource object must have been registered
with a naming service that uses the Java Naming and Directory
InterfaceTM (JNDI) API. This registration
is usually done by a person acting in the capacity of a system
administrator.
In order to be able to populate itself with data from a database, a rowset
needs to set a command property. This property is a query that is a
PreparedStatement object, which allows the query to have
parameter placeholders that are set at run time, as opposed to design time.
To set these placeholder parameters with values, a rowset provides
setter methods for setting values of each data type,
similar to the setter methods provided by the PreparedStatement
interface.
The following code fragment illustrates how the CachedRowSet
object crs might have its command property set. Note that if a
tool is used to set properties, this is the code that the tool would use.
crs.setCommand("SELECT FIRST_NAME, LAST_NAME, ADDRESS FROM CUSTOMERS " +
"WHERE CREDIT_LIMIT > ? AND REGION = ?");
The values that will be used to set the command's placeholder parameters are
contained in the RowSet object's params field, which is a
Vector object.
The CachedRowSet class provides a set of setter
methods for setting the elements in its params field. The
following code fragment demonstrates setting the two parameters in the
query from the previous example.
crs.setInt(1, 5000);
crs.setString(2, "West");
The params field now contains two elements, each of which is
an array two elements long. The first element is the parameter number;
the second is the value to be set.
In this case, the first element of params is
1, 5000, and the second element is 2,
"West". When an application calls the method
execute, it will in turn call on this RowSet object's reader,
which will in turn invoke its readData method. As part of
its implementation, readData will get the values in
params and use them to set the command's placeholder
parameters.
The following code fragment gives an idea of how the reader
does this, after obtaining the Connection object
con.
PreparedStatement pstmt = con.prepareStatement(crs.getCommand());
reader.decodeParams();
// decodeParams figures out which setter methods to use and does something
// like the following:
// for (i = 0; i < params.length; i++) {
// pstmt.setObject(i + 1, params[i]);
// }
At this point, the command for crs is the query "SELECT
FIRST_NAME, LAST_NAME, ADDRESS FROM CUSTOMERS WHERE CREDIT_LIMIT > 5000
AND REGION = "West". After the readData method executes
this command with the following line of code, it will have the data from
rs with which to populate crs.
ResultSet rs = pstmt.executeQuery();
The preceding code fragments give an idea of what goes on behind the
scenes; they would not appear in an application, which would not invoke
methods like readData and decodeParams.
In contrast, the following code fragment shows what an application might do.
It sets the rowset's command, sets the command's parameters, and executes
the command. Simply by calling the execute method,
crs populates itself with the requested data from the
table CUSTOMERS.
crs.setCommand("SELECT FIRST_NAME, LAST_NAME, ADDRESS FROM CUSTOMERS" +
"WHERE CREDIT_LIMIT > ? AND REGION = ?");
crs.setInt(1, 5000);
crs.setString(2, "West");
crs.execute();
CachedRowSet object stores data in memory,
the amount of data that it can contain at any one
time is determined by the amount of memory available. To get around this limitation,
a CachedRowSet object can retrieve data from a ResultSet
object in chunks of data, called pages. To take advantage of this mechanism,
an application sets the number of rows to be included in a page using the method
setPageSize. In other words, if the page size is set to five, a chunk
of five rows of
data will be fetched from the data source at one time. An application can also
optionally set the maximum number of rows that may be fetched at one time. If the
maximum number of rows is set to zero, or no maximum number of rows is set, there is
no limit to the number of rows that may be fetched at a time.
After properties have been set,
the CachedRowSet object must be populated with data
using either the method populate or the method execute.
The following lines of code demonstrate using the method populate.
Note that this version of the method takes two parameters, a ResultSet
handle and the row in the ResultSet object from which to start
retrieving rows.
CachedRowSet crs = new CachedRowSetImpl();
crs.setMaxRows(20);
crs.setPageSize(4);
crs.populate(rsHandle, 10);
When this code runs, crs will be populated with four rows from
rsHandle starting with the tenth row.
The next code fragment shows populating a CachedRowSet object using the
method execute, which may or may not take a Connection
object as a parameter. This code passes execute the Connection
object conHandle.
Note that there are two differences between the following code
fragment and the previous one. First, the method setMaxRows is not
called, so there is no limit set for the number of rows that crs may contain.
(Remember that crs always has the overriding limit of how much data it can
store in memory.) The second difference is that the you cannot pass the method
execute the number of the row in the ResultSet object
from which to start retrieving rows. This method always starts with the first row.
CachedRowSet crs = new CachedRowSetImpl();
crs.setPageSize(5);
crs.execute(conHandle);
After this code has run, crs will contain five rows of data from the
ResultSet object produced by the command for crs. The writer
for crs will use conHandle to connect to the data source and
execute the command for crs. An application is then able to operate on the
data in crs in the same way that it would operate on data in any other
CachedRowSet object.
To access the next page (chunk of data), an application calls the method
nextPage. This method creates a new CachedRowSet object
and fills it with the next page of data. For example, assume that the
CachedRowSet object's command returns a ResultSet object
rs with 1000 rows of data. If the page size has been set to 100, the first
call to the method nextPage will create a CachedRowSet object
containing the first 100 rows of rs. After doing what it needs to do with the
data in these first 100 rows, the application can again call the method
nextPage to create another CachedRowSet object
with the second 100 rows from rs. The data from the first CachedRowSet
object will no longer be in memory because it is replaced with the data from the
second CachedRowSet object. After the tenth call to the method nextPage,
the tenth CachedRowSet object will contain the last 100 rows of data from
rs, which are stored in memory. At any given time, the data from only one
CachedRowSet object is stored in memory.
The method nextPage returns true as long as the current
page is not the last page of rows and false when there are no more pages.
It can therefore be used in a while loop to retrieve all of the pages,
as is demonstrated in the following lines of code.
CachedRowSet crs = CachedRowSetImpl();
crs.setPageSize(100);
crs.execute(conHandle);
while(crs.nextPage()) {
while(crs.next()) {
. . . // operate on chunks (of 100 rows each) in crs,
// row by row
}
}
After this code fragment has been run, the application will have traversed all
1000 rows, but it will have had no more than 100 rows in memory at a time.
The CachedRowSet interface also defines the method previousPage.
Just as the method nextPage is analogous to the ResultSet
method next, the method previousPage is analogous to
the ResultSet method previous. Similar to the method
nextPage, previousPage creates a CachedRowSet
object containing the number of rows set as the page size. So, for instance, the
method previousPage could be used in a while loop at
the end of the preceding code fragment to navigate back through the pages from the last
page to the first page.
The method previousPage is also similar to nextPage
in that it can be used in a while
loop, except that it returns true as long as there is another page
preceding it and false when there are no more pages ahead of it.
By positioning the cursor after the last row for each page,
as is done in the following code fragment, the method previous
navigates from the last row to the first row in each page.
The code could also have left the cursor before the first row on each page and then
used the method next in a while loop to navigate each page
from the first row to the last row.
The following code fragment assumes a continuation from the previous code fragment,
meaning that the cursor for the tenth CachedRowSet object is on the
last row. The code moves the cursor to after the last row so that the first
call to the method previous will put the cursor back on the last row.
After going through all of the rows in the last page (the CachedRowSet
object crs), the code then enters
the while loop to get to the ninth page, go through the rows backwards,
go to the eighth page, go through the rows backwards, and so on to the first row
of the first page.
crs.afterLast();
while(crs.previous()) {
. . . // navigate through the rows, last to first
{
while(crs.previousPage()) {
crs.afterLast();
while(crs.previous()) {
. . . // go from the last row to the first row of each page
}
}
| Modifier and Type | Field and Description |
|---|---|
static boolean |
COMMIT_ON_ACCEPT_CHANGES
Deprecated.
Because this field is final (it is part of an interface),
its value cannot be changed.
|
CLOSE_CURSORS_AT_COMMIT, CONCUR_READ_ONLY, CONCUR_UPDATABLE, FETCH_FORWARD, FETCH_REVERSE, FETCH_UNKNOWN, HOLD_CURSORS_OVER_COMMIT, TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE, TYPE_SCROLL_SENSITIVE| Modifier and Type | Method and Description |
|---|---|
void |
acceptChanges()
Propagates row update, insert and delete changes made to this
CachedRowSet object to the underlying data source. |
void |
acceptChanges(Connection con)
Propagates all row update, insert and delete changes to the
data source backing this
CachedRowSet object
using the specified Connection object to establish a
connection to the data source. |
boolean |
columnUpdated(int idx)
Indicates whether the designated column in the current row of this
CachedRowSet object has been updated. |
boolean |
columnUpdated(String columnName)
Indicates whether the designated column in the current row of this
CachedRowSet object has been updated. |
void |
commit()
Each
CachedRowSet object's SyncProvider contains
a Connection object from the ResultSet or JDBC
properties passed to it's constructors. |
CachedRowSet |
createCopy()
Creates a
RowSet object that is a deep copy of the data in
this CachedRowSet object. |
CachedRowSet |
createCopyNoConstraints()
Creates a
CachedRowSet object that is a deep copy of
this CachedRowSet object's data but is independent of it. |
CachedRowSet |
createCopySchema()
Creates a
CachedRowSet object that is an empty copy of this
CachedRowSet object. |
RowSet |
createShared()
Returns a new
RowSet object backed by the same data as
that of this CachedRowSet object. |
void |
execute(Connection conn)
Populates this
CachedRowSet object with data, using the
given connection to produce the result set from which the data will be read. |
int[] |
getKeyColumns()
Returns an array containing one or more column numbers indicating the columns
that form a key that uniquely
identifies a row in this
CachedRowSet object. |
ResultSet |
getOriginal()
Returns a
ResultSet object containing the original value of this
CachedRowSet object. |
ResultSet |
getOriginalRow()
Returns a
ResultSet object containing the original value for the
current row only of this CachedRowSet object. |
int |
getPageSize()
Returns the page-size for the
CachedRowSet object |
RowSetWarning |
getRowSetWarnings()
Retrieves the first warning reported by calls on this
RowSet object. |
boolean |
getShowDeleted()
Retrieves a
boolean indicating whether rows marked
for deletion appear in the set of current rows. |
SyncProvider |
getSyncProvider()
Retrieves the
SyncProvider implementation for this
CachedRowSet object. |
String |
getTableName()
Returns an identifier for the object (table) that was used to
create this
CachedRowSet object. |
boolean |
nextPage()
Increments the current page of the
CachedRowSet. |
void |
populate(ResultSet data)
Populates this
CachedRowSet object with data from
the given ResultSet object. |
void |
populate(ResultSet rs,
int startRow)
Populates this
CachedRowSet object with data from
the given ResultSet object. |
boolean |
previousPage()
Decrements the current page of the
CachedRowSet. |
void |
release()
Releases the current contents of this
CachedRowSet
object and sends a rowSetChanged event to all
registered listeners. |
void |
restoreOriginal()
Restores this
CachedRowSet object to its original
value, that is, its value before the last set of changes. |
void |
rollback()
Each
CachedRowSet object's SyncProvider contains
a Connection object from the original ResultSet
or JDBC properties passed to it. |
void |
rollback(Savepoint s)
Each
CachedRowSet object's SyncProvider contains
a Connection object from the original ResultSet
or JDBC properties passed to it. |
void |
rowSetPopulated(RowSetEvent event,
int numRows)
Notifies registered listeners that a RowSet object in the given RowSetEvent
object has populated a number of additional rows.
|
void |
setKeyColumns(int[] keys)
Sets this
CachedRowSet object's keyCols
field with the given array of column numbers, which forms a key
for uniquely identifying a row in this CachedRowSet object. |
void |
setMetaData(RowSetMetaData md)
Sets the metadata for this
CachedRowSet object with
the given RowSetMetaData object. |
void |
setOriginalRow()
Sets the current row in this
CachedRowSet object as the original
row. |
void |
setPageSize(int size)
Sets the
CachedRowSet object's page-size. |
void |
setShowDeleted(boolean b)
Sets the property
showDeleted to the given
boolean value, which determines whether
rows marked for deletion appear in the set of current rows. |
void |
setSyncProvider(String provider)
Sets the
SyncProvider objec for this CachedRowSet
object to the one specified. |
void |
setTableName(String tabName)
Sets the identifier for the table from which this
CachedRowSet
object was derived to the given table name. |
int |
size()
Returns the number of rows in this
CachedRowSet
object. |
Collection<?> |
toCollection()
Converts this
CachedRowSet object to a Collection
object that contains all of this CachedRowSet object's data. |
Collection<?> |
toCollection(int column)
Converts the designated column in this
CachedRowSet object
to a Collection object. |
Collection<?> |
toCollection(String column)
Converts the designated column in this
CachedRowSet object
to a Collection object. |
void |
undoDelete()
Cancels the deletion of the current row and notifies listeners that
a row has changed.
|
void |
undoInsert()
Immediately removes the current row from this
CachedRowSet
object if the row has been inserted, and also notifies listeners that a
row has changed. |
void |
undoUpdate()
Immediately reverses the last update operation if the
row has been modified.
|
addRowSetListener, clearParameters, execute, getCommand, getDataSourceName, getEscapeProcessing, getMaxFieldSize, getMaxRows, getPassword, getQueryTimeout, getTransactionIsolation, getTypeMap, getUrl, getUsername, isReadOnly, removeRowSetListener, setArray, setAsciiStream, setAsciiStream, setAsciiStream, setAsciiStream, setBigDecimal, setBigDecimal, setBinaryStream, setBinaryStream, setBinaryStream, setBinaryStream, setBlob, setBlob, setBlob, setBlob, setBlob, setBlob, setBoolean, setBoolean, setByte, setByte, setBytes, setBytes, setCharacterStream, setCharacterStream, setCharacterStream, setCharacterStream, setClob, setClob, setClob, setClob, setClob, setClob, setCommand, setConcurrency, setDataSourceName, setDate, setDate, setDate, setDate, setDouble, setDouble, setEscapeProcessing, setFloat, setFloat, setInt, setInt, setLong, setLong, setMaxFieldSize, setMaxRows, setNCharacterStream, setNCharacterStream, setNCharacterStream, setNCharacterStream, setNClob, setNClob, setNClob, setNClob, setNClob, setNClob, setNString, setNString, setNull, setNull, setNull, setNull, setObject, setObject, setObject, setObject, setObject, setObject, setPassword, setQueryTimeout, setReadOnly, setRef, setRowId, setRowId, setShort, setShort, setSQLXML, setSQLXML, setString, setString, setTime, setTime, setTime, setTime, setTimestamp, setTimestamp, setTimestamp, setTimestamp, setTransactionIsolation, setType, setTypeMap, setURL, setUrl, setUsernameabsolute, afterLast, beforeFirst, cancelRowUpdates, clearWarnings, close, deleteRow, findColumn, first, getArray, getArray, getAsciiStream, getAsciiStream, getBigDecimal, getBigDecimal, getBigDecimal, getBigDecimal, getBinaryStream, getBinaryStream, getBlob, getBlob, getBoolean, getBoolean, getByte, getByte, getBytes, getBytes, getCharacterStream, getCharacterStream, getClob, getClob, getConcurrency, getCursorName, getDate, getDate, getDate, getDate, getDouble, getDouble, getFetchDirection, getFetchSize, getFloat, getFloat, getHoldability, getInt, getInt, getLong, getLong, getMetaData, getNCharacterStream, getNCharacterStream, getNClob, getNClob, getNString, getNString, getObject, getObject, getObject, getObject, getObject, getObject, getRef, getRef, getRow, getRowId, getRowId, getShort, getShort, getSQLXML, getSQLXML, getStatement, getString, getString, getTime, getTime, getTime, getTime, getTimestamp, getTimestamp, getTimestamp, getTimestamp, getType, getUnicodeStream, getUnicodeStream, getURL, getURL, getWarnings, insertRow, isAfterLast, isBeforeFirst, isClosed, isFirst, isLast, last, moveToCurrentRow, moveToInsertRow, next, previous, refreshRow, relative, rowDeleted, rowInserted, rowUpdated, setFetchDirection, setFetchSize, updateArray, updateArray, updateAsciiStream, updateAsciiStream, updateAsciiStream, updateAsciiStream, updateAsciiStream, updateAsciiStream, updateBigDecimal, updateBigDecimal, updateBinaryStream, updateBinaryStream, updateBinaryStream, updateBinaryStream, updateBinaryStream, updateBinaryStream, updateBlob, updateBlob, updateBlob, updateBlob, updateBlob, updateBlob, updateBoolean, updateBoolean, updateByte, updateByte, updateBytes, updateBytes, updateCharacterStream, updateCharacterStream, updateCharacterStream, updateCharacterStream, updateCharacterStream, updateCharacterStream, updateClob, updateClob, updateClob, updateClob, updateClob, updateClob, updateDate, updateDate, updateDouble, updateDouble, updateFloat, updateFloat, updateInt, updateInt, updateLong, updateLong, updateNCharacterStream, updateNCharacterStream, updateNCharacterStream, updateNCharacterStream, updateNClob, updateNClob, updateNClob, updateNClob, updateNClob, updateNClob, updateNString, updateNString, updateNull, updateNull, updateObject, updateObject, updateObject, updateObject, updateRef, updateRef, updateRow, updateRowId, updateRowId, updateShort, updateShort, updateSQLXML, updateSQLXML, updateString, updateString, updateTime, updateTime, updateTimestamp, updateTimestamp, wasNullisWrapperFor, unwrapgetMatchColumnIndexes, getMatchColumnNames, setMatchColumn, setMatchColumn, setMatchColumn, setMatchColumn, unsetMatchColumn, unsetMatchColumn, unsetMatchColumn, unsetMatchColumn@Deprecated static final boolean COMMIT_ON_ACCEPT_CHANGES
CachedRowSet object's SyncProvider
to commit the changes when acceptChanges() is called. If
set to false, the changes will not be committed until one of the
CachedRowSet interface transaction methods is called.commit(),
rollback(),
Constant Field Valuesvoid populate(ResultSet data) throws SQLException
CachedRowSet object with data from
the given ResultSet object.
This method can be used as an alternative to the execute method when an
application has a connection to an open ResultSet object.
Using the method populate can be more efficient than using
the version of the execute method that takes no parameters
because it does not open a new connection and re-execute this
CachedRowSet object's command. Using the populate
method is more a matter of convenience when compared to using the version
of execute that takes a ResultSet object.
data - the ResultSet object containing the data
to be read into this CachedRowSet objectSQLException - if a null ResultSet object is supplied
or this CachedRowSet object cannot
retrieve the associated ResultSetMetaData objectexecute(java.sql.Connection),
ResultSet,
ResultSetMetaDatavoid execute(Connection conn) throws SQLException
CachedRowSet object with data, using the
given connection to produce the result set from which the data will be read.
This method should close any database connections that it creates to
ensure that this CachedRowSet object is disconnected except when
it is reading data from its data source or writing data to its data source.
The reader for this CachedRowSet object
will use conn to establish a connection to the data source
so that it can execute the rowset's command and read data from the
the resulting ResultSet object into this
CachedRowSet object. This method also closes conn
after it has populated this CachedRowSet object.
If this method is called when an implementation has already been
populated, the contents and the metadata are (re)set. Also, if this method is
called before the method acceptChanges has been called
to commit outstanding updates, those updates are lost.
conn - a standard JDBC Connection object with valid
propertiesSQLException - if an invalid Connection object is supplied
or an error occurs in establishing the connection to the
data sourcepopulate(java.sql.ResultSet),
Connectionvoid acceptChanges()
throws SyncProviderException
CachedRowSet object to the underlying data source.
This method calls on this CachedRowSet object's writer
to do the work behind the scenes.
Standard CachedRowSet implementations should use the
SyncFactory singleton
to obtain a SyncProvider instance providing a
RowSetWriter object (writer). The writer will attempt
to propagate changes made in this CachedRowSet object
back to the data source.
When the method acceptChanges executes successfully, in
addition to writing changes to the data source, it
makes the values in the current row be the values in the original row.
Depending on the synchronization level of the SyncProvider
implementation being used, the writer will compare the original values
with those in the data source to check for conflicts. When there is a conflict,
the RIOptimisticProvider implementation, for example, throws a
SyncProviderException and does not write anything to the
data source.
An application may choose to catch the SyncProviderException
object and retrieve the SyncResolver object it contains.
The SyncResolver object lists the conflicts row by row and
sets a lock on the data source to avoid further conflicts while the
current conflicts are being resolved.
Further, for each conflict, it provides methods for examining the conflict
and setting the value that should be persisted in the data source.
After all conflicts have been resolved, an application must call the
acceptChanges method again to write resolved values to the
data source. If all of the values in the data source are already the
values to be persisted, the method acceptChanges does nothing.
Some provider implementations may use locks to ensure that there are no
conflicts. In such cases, it is guaranteed that the writer will succeed in
writing changes to the data source when the method acceptChanges
is called. This method may be called immediately after the methods
updateRow, insertRow, or deleteRow
have been called, but it is more efficient to call it only once after
all changes have been made so that only one connection needs to be
established.
Note: The acceptChanges() method will determine if the
COMMIT_ON_ACCEPT_CHANGES is set to true or not. If it is set
to true, all updates in the synchronization are committed to the data
source. Otherwise, the application must explicity call the
commit() or rollback() methods as appropriate.
SQLException - if the cursor is on the insert rowSyncProviderException - if the underlying
synchronization provider's writer fails to write the updates
back to the data sourceacceptChanges(java.sql.Connection),
RowSetWriter,
SyncFactory,
SyncProvider,
SyncProviderException,
SyncResolvervoid acceptChanges(Connection con) throws SyncProviderException
CachedRowSet object
using the specified Connection object to establish a
connection to the data source.
The other version of the acceptChanges method is not passed
a connection because it uses
the Connection object already defined within the RowSet
object, which is the connection used for populating it initially.
This form of the method acceptChanges is similar to the
form that takes no arguments; however, unlike the other form, this form
can be used only when the underlying data source is a JDBC data source.
The updated Connection properties must be used by the
SyncProvider to reset the RowSetWriter
configuration to ensure that the contents of the CachedRowSet
object are synchronized correctly.
When the method acceptChanges executes successfully, in
addition to writing changes to the data source, it
makes the values in the current row be the values in the original row.
Depending on the synchronization level of the SyncProvider
implementation being used, the writer will compare the original values
with those in the data source to check for conflicts. When there is a conflict,
the RIOptimisticProvider implementation, for example, throws a
SyncProviderException and does not write anything to the
data source.
An application may choose to catch the SyncProviderException
object and retrieve the SyncResolver object it contains.
The SyncResolver object lists the conflicts row by row and
sets a lock on the data source to avoid further conflicts while the
current conflicts are being resolved.
Further, for each conflict, it provides methods for examining the conflict
and setting the value that should be persisted in the data source.
After all conflicts have been resolved, an application must call the
acceptChanges method again to write resolved values to the
data source. If all of the values in the data source are already the
values to be persisted, the method acceptChanges does nothing.
Some provider implementations may use locks to ensure that there are no
conflicts. In such cases, it is guaranteed that the writer will succeed in
writing changes to the data source when the method acceptChanges
is called. This method may be called immediately after the methods
updateRow, insertRow, or deleteRow
have been called, but it is more efficient to call it only once after
all changes have been made so that only one connection needs to be
established.
Note: The acceptChanges() method will determine if the
COMMIT_ON_ACCEPT_CHANGES is set to true or not. If it is set
to true, all updates in the synchronization are committed to the data
source. Otherwise, the application must explicity call the
commit or rollback methods as appropriate.
con - a standard JDBC Connection objectSQLException - if the cursor is on the insert rowSyncProviderException - if the underlying
synchronization provider's writer fails to write the updates
back to the data sourceacceptChanges(),
RowSetWriter,
SyncFactory,
SyncProvider,
SyncProviderException,
SyncResolvervoid restoreOriginal()
throws SQLException
CachedRowSet object to its original
value, that is, its value before the last set of changes. If there
have been no changes to the rowset or only one set of changes,
the original value is the value with which this CachedRowSet object
was populated; otherwise, the original value is
the value it had immediately before its current value.
When this method is called, a CachedRowSet implementation
must ensure that all updates, inserts, and deletes to the current
rowset instance are replaced by the previous values. In addition,
the cursor should be
reset to the first row and a rowSetChanged event
should be fired to notify all registered listeners.
SQLException - if an error occurs rolling back the current value of
this CachedRowSet object to its previous valueRowSetListener.rowSetChanged(javax.sql.RowSetEvent)void release()
throws SQLException
CachedRowSet
object and sends a rowSetChanged event to all
registered listeners. Any outstanding updates are discarded and
the rowset contains no rows after this method is called. There
are no interactions with the underlying data source, and any rowset
content, metadata, and content updates should be non-recoverable.
This CachedRowSet object should lock until its contents and
associated updates are fully cleared, thus preventing 'dirty' reads by
other components that hold a reference to this RowSet object.
In addition, the contents cannot be released
until all all components reading this CachedRowSet object
have completed their reads. This CachedRowSet object
should be returned to normal behavior after firing the
rowSetChanged event.
The metadata, including JDBC properties and Synchronization SPI
properties, are maintained for future use. It is important that
properties such as the command property be
relevant to the originating data source from which this CachedRowSet
object was originally established.
This method empties a rowset, as opposed to the close method,
which marks the entire rowset as recoverable to allow the garbage collector
the rowset's Java VM resources.
SQLException - if an error occurs flushing the contents of this
CachedRowSet objectRowSetListener.rowSetChanged(javax.sql.RowSetEvent),
ResultSet.close()void undoDelete()
throws SQLException
In addition, multiple cancellations of row deletions can be made by adjusting the position of the cursor using any of the cursor position control methods such as:
CachedRowSet.absolute
CachedRowSet.first
CachedRowSet.last
SQLException - if (1) the current row has not been deleted or
(2) the cursor is on the insert row, before the first row, or
after the last rowundoInsert(),
ResultSet.cancelRowUpdates()void undoInsert()
throws SQLException
CachedRowSet
object if the row has been inserted, and also notifies listeners that a
row has changed. This method can be called at any time during the
lifetime of a rowset and assuming the current row is within
the exception limitations (see below), it cancels the row insertion
of the current row.
In addition, multiple cancellations of row insertions can be made by adjusting the position of the cursor using any of the cursor position control methods such as:
CachedRowSet.absolute
CachedRowSet.first
CachedRowSet.last
SQLException - if (1) the current row has not been inserted or (2)
the cursor is before the first row, after the last row, or on the
insert rowundoDelete(),
ResultSet.cancelRowUpdates()void undoUpdate()
throws SQLException
acceptChanges) or population. This method may also be called
while performing updates to the insert row.
undoUpdate may be called at any time during the lifetime of a
rowset; however, after a synchronization has occurred, this method has no
effect until further modification to the rowset data has occurred.
SQLException - if the cursor is before the first row or after the last
row in in this CachedRowSet objectundoDelete(),
undoInsert(),
ResultSet.cancelRowUpdates()boolean columnUpdated(int idx)
throws SQLException
CachedRowSet object has been updated.idx - an int identifying the column to be checked for updatestrue if the designated column has been visibly updated;
false otherwiseSQLException - if the cursor is on the insert row, before the first row,
or after the last rowDatabaseMetaData.updatesAreDetected(int)boolean columnUpdated(String columnName) throws SQLException
CachedRowSet object has been updated.columnName - a String object giving the name of the
column to be checked for updatestrue if the column has been visibly updated;
false otherwiseSQLException - if the cursor is on the insert row, before the first row,
or after the last rowDatabaseMetaData.updatesAreDetected(int)Collection<?> toCollection() throws SQLException
CachedRowSet object to a Collection
object that contains all of this CachedRowSet object's data.
Implementations have some latitude in
how they can represent this Collection object because of the
abstract nature of the Collection framework.
Each row must be fully represented in either a
general purpose Collection implementation or a specialized
Collection implementation, such as a TreeMap
object or a Vector object.
An SQL NULL column value must be represented as a null
in the Java programming language.
The standard reference implementation for the CachedRowSet
interface uses a TreeMap object for the rowset, with the
values in each row being contained in Vector objects. It is
expected that most implementations will do the same.
The TreeMap type of collection guarantees that the map will be in
ascending key order, sorted according to the natural order for the
key's class.
Each key references a Vector object that corresponds to one
row of a RowSet object. Therefore, the size of each
Vector object must be exactly equal to the number of
columns in the RowSet object.
The key used by the TreeMap collection is determined by the
implementation, which may choose to leverage a set key that is
available within the internal RowSet tabular structure by
virtue of a key already set either on the RowSet object
itself or on the underlying SQL data.
Collection object that contains the values in
each row in this CachedRowSet objectSQLException - if an error occurs generating the collectiontoCollection(int),
toCollection(String)Collection<?> toCollection(int column) throws SQLException
CachedRowSet object
to a Collection object. Implementations have some latitude in
how they can represent this Collection object because of the
abstract nature of the Collection framework.
Each column value should be fully represented in either a
general purpose Collection implementation or a specialized
Collection implementation, such as a Vector object.
An SQL NULL column value must be represented as a null
in the Java programming language.
The standard reference implementation uses a Vector object
to contain the column values, and it is expected
that most implementations will do the same. If a Vector object
is used, it size must be exactly equal to the number of rows
in this CachedRowSet object.
column - an int indicating the column whose values
are to be represented in a Collection objectCollection object that contains the values
stored in the specified column of this CachedRowSet
objectSQLException - if an error occurs generating the collection or
an invalid column id is providedtoCollection(),
toCollection(String)Collection<?> toCollection(String column) throws SQLException
CachedRowSet object
to a Collection object. Implementations have some latitude in
how they can represent this Collection object because of the
abstract nature of the Collection framework.
Each column value should be fully represented in either a
general purpose Collection implementation or a specialized
Collection implementation, such as a Vector object.
An SQL NULL column value must be represented as a null
in the Java programming language.
The standard reference implementation uses a Vector object
to contain the column values, and it is expected
that most implementations will do the same. If a Vector object
is used, it size must be exactly equal to the number of rows
in this CachedRowSet object.
column - a String object giving the name of the
column whose values are to be represented in a collectionCollection object that contains the values
stored in the specified column of this CachedRowSet
objectSQLException - if an error occurs generating the collection or
an invalid column id is providedtoCollection(),
toCollection(int)SyncProvider getSyncProvider() throws SQLException
SyncProvider implementation for this
CachedRowSet object. Internally, this method is used by a rowset
to trigger read or write actions between the rowset
and the data source. For example, a rowset may need to get a handle
on the the rowset reader (RowSetReader object) from the
SyncProvider to allow the rowset to be populated.
RowSetReader rowsetReader = null;
SyncProvider provider =
SyncFactory.getInstance("javax.sql.rowset.provider.RIOptimisticProvider");
if (provider instanceof RIOptimisticProvider) {
rowsetReader = provider.getRowSetReader();
}
Assuming rowsetReader is a private, accessible field within
the rowset implementation, when an application calls the execute
method, it in turn calls on the reader's readData method
to populate the RowSet object.
rowsetReader.readData((RowSetInternal)this);
In addition, an application can use the SyncProvider object
returned by this method to call methods that return information about the
SyncProvider object, including information about the
vendor, version, provider identification, synchronization grade, and locks
it currently has set.
SyncProvider object that was set when the rowset
was instantiated, or if none was was set, the default providerSQLException - if an error occurs while returning the
SyncProvider objectsetSyncProvider(java.lang.String)void setSyncProvider(String provider) throws SQLException
SyncProvider objec for this CachedRowSet
object to the one specified. This method
allows the SyncProvider object to be reset.
A CachedRowSet implementation should always be instantiated
with an available SyncProvider mechanism, but there are
cases where resetting the SyncProvider object is desirable
or necessary. For example, an application might want to use the default
SyncProvider object for a time and then choose to use a provider
that has more recently become available and better fits its needs.
Resetting the SyncProvider object causes the
RowSet object to request a new SyncProvider implementation
from the SyncFactory. This has the effect of resetting
all previous connections and relationships with the originating
data source and can potentially drastically change the synchronization
behavior of a disconnected rowset.
provider - a String object giving the fully qualified class
name of a SyncProvider implementationSQLException - if an error occurs while attempting to reset the
SyncProvider implementationgetSyncProvider()int size()
CachedRowSet
object.void setMetaData(RowSetMetaData md) throws SQLException
CachedRowSet object with
the given RowSetMetaData object. When a
RowSetReader object is reading the contents of a rowset,
it creates a RowSetMetaData object and initializes
it using the methods in the RowSetMetaData implementation.
The reference implementation uses the RowSetMetaDataImpl
class. When the reader has completed reading the rowset contents,
this method is called internally to pass the RowSetMetaData
object to the rowset.md - a RowSetMetaData object containing
metadata about the columns in this CachedRowSet objectSQLException - if invalid metadata is supplied to the
rowsetResultSet getOriginal() throws SQLException
ResultSet object containing the original value of this
CachedRowSet object.
The cursor for the ResultSet
object should be positioned before the first row.
In addition, the returned ResultSet object should have the following
properties:
The original value for a RowSet object is the value it had before
the last synchronization with the underlying data source. If there have been
no synchronizations, the original value will be the value with which the
RowSet object was populated. This method is called internally
when an aplication calls the method acceptChanges and the
SyncProvider object has been implemented to check for conflicts.
If this is the case, the writer compares the original value with the value
currently in the data source to check for conflicts.
ResultSet object that contains the original value for
this CachedRowSet objectSQLException - if an error occurs producing the
ResultSet objectResultSet getOriginalRow() throws SQLException
ResultSet object containing the original value for the
current row only of this CachedRowSet object.
The cursor for the ResultSet
object should be positioned before the first row.
In addition, the returned ResultSet object should have the following
properties:
SQLException - if there is no current rowsetOriginalRow()void setOriginalRow()
throws SQLException
CachedRowSet object as the original
row.
This method is called internally after the any modified values in the current row have been synchronized with the data source. The current row must be tagged as no longer inserted, deleted or updated.
A call to setOriginalRow is irreversible.
SQLException - if there is no current row or an error is
encountered resetting the contents of the original rowgetOriginalRow()String getTableName() throws SQLException
CachedRowSet object. This name may be set on multiple occasions,
and the specification imposes no limits on how many times this
may occur or whether standard implementations should keep track
of previous table names.String object giving the name of the table that is the
source of data for this CachedRowSet object or null
if no name has been set for the tableSQLException - if an error is encountered returning the table nameResultSetMetaData.getTableName(int)void setTableName(String tabName) throws SQLException
CachedRowSet
object was derived to the given table name. The writer uses this name to
determine which table to use when comparing the values in the data source with the
CachedRowSet object's values during a synchronization attempt.
The table identifier also indicates where modified values from this
CachedRowSet object should be written.
The implementation of this CachedRowSet object may obtain the
the name internally from the RowSetMetaDataImpl object.
tabName - a String object identifying the table from which this
CachedRowSet object was derived; cannot be null
but may be an empty stringSQLException - if an error is encountered naming the table or
tabName is nullRowSetMetaData.setTableName(int, java.lang.String),
RowSetWriter,
SyncProviderint[] getKeyColumns()
throws SQLException
CachedRowSet object.CachedRowSet object. This array should be
empty if no columns are representative of a primary key.SQLException - if this CachedRowSet object is emptysetKeyColumns(int[]),
Joinable.getMatchColumnIndexes(),
Joinable.getMatchColumnNames()void setKeyColumns(int[] keys)
throws SQLException
CachedRowSet object's keyCols
field with the given array of column numbers, which forms a key
for uniquely identifying a row in this CachedRowSet object.
If a CachedRowSet object becomes part of a JoinRowSet
object, the keys defined by this method and the resulting constraints are
maintained if the columns designated as key columns also become match
columns.
keys - an array of int indicating the columns that form
a primary key for this CachedRowSet object; every
element in the array must be greater than 0 and
less than or equal to the number of columns in this rowsetSQLException - if any of the numbers in the given array
are not valid for this rowsetgetKeyColumns(),
Joinable.setMatchColumn(String),
Joinable.setMatchColumn(int)RowSet createShared() throws SQLException
RowSet object backed by the same data as
that of this CachedRowSet object. In effect, both
CachedRowSet objects have a cursor over the same data.
As a result, any changes made by a duplicate are visible to the original
and to any other duplicates, just as a change made by the original is visible
to all of its duplicates. If a duplicate calls a method that changes the
underlying data, the method it calls notifies all registered listeners
just as it would when it is called by the original CachedRowSet
object.
In addition, any RowSet object
created by this method will have the same properties as this
CachedRowSet object. For example, if this CachedRowSet
object is read-only, all of its duplicates will also be read-only. If it is
changed to be updatable, the duplicates also become updatable.
NOTE: If multiple threads access RowSet objects created from
the createShared() method, the following behavior is specified
to preserve shared data integrity: reads and writes of all
shared RowSet objects should be made serially between each
object and the single underlying tabular structure.
RowSet object that has the same properties
as this CachedRowSet object and that has a cursor over
the same dataSQLException - if an error occurs or cloning is not
supported in the underlying platformRowSetEvent,
RowSetListenerCachedRowSet createCopy() throws SQLException
RowSet object that is a deep copy of the data in
this CachedRowSet object. In contrast to
the RowSet object generated from a createShared
call, updates made to the copy of the original RowSet object
must not be visible to the original RowSet object. Also, any
event listeners that are registered with the original
RowSet must not have scope over the new
RowSet copies. In addition, any constraint restrictions
established must be maintained.RowSet object that is a deep copy
of this CachedRowSet object and is
completely independent of this CachedRowSet objectSQLException - if an error occurs in generating the copy of
the of this CachedRowSet objectcreateShared(),
createCopySchema(),
createCopyNoConstraints(),
RowSetEvent,
RowSetListenerCachedRowSet createCopySchema() throws SQLException
CachedRowSet object that is an empty copy of this
CachedRowSet object. The copy
must not contain any contents but only represent the table
structure of the original CachedRowSet object. In addition, primary
or foreign key constraints set in the originating CachedRowSet object must
be equally enforced in the new empty CachedRowSet object.
In contrast to
the RowSet object generated from a createShared method
call, updates made to a copy of this CachedRowSet object with the
createCopySchema method must not be visible to it.
Applications can form a WebRowSet object from the CachedRowSet
object returned by this method in order
to export the RowSet schema definition to XML for future use.
SQLException - if an error occurs in cloning the structure of this
CachedRowSet objectcreateShared(),
createCopySchema(),
createCopyNoConstraints(),
RowSetEvent,
RowSetListenerCachedRowSet createCopyNoConstraints() throws SQLException
CachedRowSet object that is a deep copy of
this CachedRowSet object's data but is independent of it.
In contrast to
the RowSet object generated from a createShared
method call, updates made to a copy of this CachedRowSet object
must not be visible to it. Also, any
event listeners that are registered with this
CachedRowSet object must not have scope over the new
RowSet object. In addition, any constraint restrictions
established for this CachedRowSet object must not be maintained
in the copy.CachedRowSet object that is a deep copy
of this CachedRowSet object and is
completely independent of this CachedRowSet objectSQLException - if an error occurs in generating the copy of
the of this CachedRowSet objectcreateCopy(),
createShared(),
createCopySchema(),
RowSetEvent,
RowSetListenerRowSetWarning getRowSetWarnings() throws SQLException
RowSet object.
Subsequent warnings on this RowSet object will be chained to the
RowSetWarning object that this method returns.
The warning chain is automatically cleared each time a new row is read.
This method may not be called on a RowSet object that has been closed;
doing so will cause a SQLException to be thrown.RowSetWarning
object reported or null if there are noneSQLException - if this method is called on a closed RowSetRowSetWarningboolean getShowDeleted()
throws SQLException
boolean indicating whether rows marked
for deletion appear in the set of current rows. If true is
returned, deleted rows are visible with the current rows. If
false is returned, rows are not visible with the set of
current rows. The default value is false.
Standard rowset implementations may choose to restrict this behavior due to security considerations or to better fit certain deployment scenarios. This is left as implementation defined and does not represent standard behavior.
Note: Allowing deleted rows to remain visible complicates the behavior
of some standard JDBC RowSet Implementations methods.
However, most rowset users can simply ignore this extra detail because
only very specialized applications will likely want to take advantage of
this feature.
true if deleted rows are visible;
false otherwiseSQLException - if a rowset implementation is unable to
to determine whether rows marked for deletion are visiblesetShowDeleted(boolean)void setShowDeleted(boolean b)
throws SQLException
showDeleted to the given
boolean value, which determines whether
rows marked for deletion appear in the set of current rows.
If the value is set to true, deleted rows are immediately
visible with the set of current rows. If the value is set to
false, the deleted rows are set as invisible with the
current set of rows.
Standard rowset implementations may choose to restrict this behavior due to security considerations or to better fit certain deployment scenarios. This is left as implementations defined and does not represent standard behavior.
b - true if deleted rows should be shown;
false otherwiseSQLException - if a rowset implementation is unable to
to reset whether deleted rows should be visiblegetShowDeleted()void commit()
throws SQLException
CachedRowSet object's SyncProvider contains
a Connection object from the ResultSet or JDBC
properties passed to it's constructors. This method wraps the
Connection commit method to allow flexible
auto commit or non auto commit transactional control support.
Makes all changes that are performed by the acceptChanges()
method since the previous commit/rollback permanent. This method should
be used only when auto-commit mode has been disabled.
SQLException - if a database access error occurs or this
Connection object within this CachedRowSet is in auto-commit modeConnection.setAutoCommit(boolean)void rollback()
throws SQLException
CachedRowSet object's SyncProvider contains
a Connection object from the original ResultSet
or JDBC properties passed to it.
Undoes all changes made in the current transaction. This method should be used only when auto-commit mode has been disabled.
SQLException - if a database access error occurs or this Connection
object within this CachedRowSet is in auto-commit mode.void rollback(Savepoint s) throws SQLException
CachedRowSet object's SyncProvider contains
a Connection object from the original ResultSet
or JDBC properties passed to it.
Undoes all changes made in the current transaction back to the last
Savepoint transaction marker. This method should be used only
when auto-commit mode has been disabled.
s - A Savepoint transaction markerSQLException - if a database access error occurs or this Connection
object within this CachedRowSet is in auto-commit mode.void rowSetPopulated(RowSetEvent event, int numRows) throws SQLException
numRows parameter
ensures that this event will only be fired every numRow.
The source of the event can be retrieved with the method event.getSource.
event - a RowSetEvent object that contains the
RowSet object that is the source of the eventsnumRows - when populating, the number of rows interval on which the
CachedRowSet populated should fire; the default value
is zero; cannot be less than fetchSize or zeroSQLExceptionvoid populate(ResultSet rs, int startRow) throws SQLException
CachedRowSet object with data from
the given ResultSet object. While related to the populate(ResultSet)
method, an additional parameter is provided to allow starting position within
the ResultSet from where to populate the CachedRowSet
instance.
This method can be used as an alternative to the execute method when an
application has a connection to an open ResultSet object.
Using the method populate can be more efficient than using
the version of the execute method that takes no parameters
because it does not open a new connection and re-execute this
CachedRowSet object's command. Using the populate
method is more a matter of convenience when compared to using the version
of execute that takes a ResultSet object.
startRow - the position in the ResultSet from where to start
populating the records in this CachedRowSetrs - the ResultSet object containing the data
to be read into this CachedRowSet objectSQLException - if a null ResultSet object is supplied
or this CachedRowSet object cannot
retrieve the associated ResultSetMetaData objectexecute(java.sql.Connection),
populate(ResultSet),
ResultSet,
ResultSetMetaDatavoid setPageSize(int size)
throws SQLException
CachedRowSet object's page-size. A CachedRowSet
may be configured to populate itself in page-size sized batches of rows. When
either populate() or execute() are called, the
CachedRowSet fetches an additional page according to the
original SQL query used to populate the RowSet.size - the page-size of the CachedRowSetSQLException - if an error occurs setting the CachedRowSet
page size or if the page size is less than 0.int getPageSize()
CachedRowSet objectint page sizeboolean nextPage()
throws SQLException
CachedRowSet. This causes
the CachedRowSet implementation to fetch the next page-size
rows and populate the RowSet, if remaining rows remain within scope of the
original SQL query used to populated the RowSet.SQLException - if an error occurs fetching the next page, or if this
method is called prematurely before populate or execute.boolean previousPage()
throws SQLException
CachedRowSet. This causes
the CachedRowSet implementation to fetch the previous page-size
rows and populate the RowSet. The amount of rows returned in the previous
page must always remain within scope of the original SQL query used to
populate the RowSet.SQLException - if an error occurs fetching the previous page, or if
this method is called prematurely before populate or execute.